Trending Now

Wednesday, January 7, 2015

how to flash update Installing Rockchip drivers for flashing

Hello Friends, Welcome to Here you will get the how to flash update Installing Rockchip drivers for flashing Download of Latest file version 2016. We are ready here to provide your desire Android files free Download.

1) Hold the volume up

2) Press the reset button for two seconds than release while still holding the volume buttom, a few seconds later the tablet will go into recovery mode, the screen goes black.

3) Connect your tablet to your Pc with the supplied cable.

You will now see this pop up on your computer.

Now go into device manager on your computer and look for the UNKNOWN DEVICE, right click and select update device software and you will be presented with this screen.

Now click browse my computer for driver software. Locate the firmware folder and go to the drivers folder and select the correct driver for your operating system. This will now load the Rockchip driver for your tablet. See below

Click the always trust software from box, and this will install the Rockchip drivers on your computer and you will see this come up when finished.


You can now see the RK29 Device in device manager.

That is the driver installed and ready to go!

Installing firmware using the Rockchip RKAndroid Tool

Go into the firmware folder and start the RK29 update program.

You should now see the FOUND RKANDROID LOADER ROCK USB at the bottom of the program screen, this is good your device is connected. Click Erase IDB and you will notice that some writing will come up on the right, just wait for that to complete. Now click run and this will install the firmware on your tablet.
Be patient for this bit it can take up to 5 minutes, you will notice that your tablet will have some writing come up on it, this is the flashing process. Once this is done your tablet will reboot with the new firmware!

If you want to require knowing more about how to flash update Installing Rockchip drivers for flashing file Resource or updates. Please ask to us via our contact us form or comment box. Please make sure that, you don’t send Personal information via the Comment box. Thank you for being with us.